How to Find a Fiat 500 Spare Key

fiat Ducato remote Key Programming's classic 500 has become an iconic vehicle since its relaunch in 2007. The company has since kicked off a bigger offensive towards various powertrains, including a mild hybrid version.

The replacement of key fob batteries on the Fiat 500 are simple and affordable. The Fiat main dealer will deliver the key in approximately 10 days.

Diagnostics of a fault

The key fob is equipped with an electronic chip that communicates with the Fiat immobiliser system. This ensures that only cars with a valid license can start the vehicle. If the transponder on your key fob is damaged, it will not be able to connect to the immobiliser. This means that your car won't start.

The good thing is that it's possible to repair a damaged or broken key fob if the chip is not physically damaged. A professional locksmith can help with this issue, and they'll use dealer-standard technology to fix it quickly and effectively.

With an OBD scanner, it's possible to verify if the fob is still communicating with the receiver module. It's a simple process, and it can provide first indications of the root cause. If the OBD scanner indicates that there is no communication between the receiver and transmitter modules, it might be required for the fob's transceiver module to be replaced. This is a costly option and should be left to locksmiths.

Dead Coin Battery

The most frequent cause of an unresponsive key fob is a dead battery. Fortunately, this is an easy fix that only takes about 15 minutes. Ensure that the key fob can be seen by your vehicle. Press the "Lock" and "Unlock" buttons to check if they respond.

If the key fob is out of range, it may not respond at all or might only work intermittently. This could be an indication that the circuit board in the key fob has failed. In this situation, you'll need to consult the owner's manual to find out instructions on how to get a replacement key for fiat 500 to reprogram the key fob.

The mechanical latch can be removed from the back of the key fob. (See the image below). Then, gently pull the edge of the battery holder away from the switch to release the old coin-cell battery. Then, place a new CR2032 3 volt batteries into the fob assembly, with the "+" side facing the cover on the rear of the key fob and the "-" side facing down towards the rubber buttons.

Water Damage

While the key fob is fitted with rubber seals that keep water from the chip inside, it's not waterproof. The key fob is likely to be able to withstand water from a shower or water from a wash cycle, but submerging it in ocean or pool waters is not recommended.

The key fob will have to be reset if it is exposed to water. This process can be done by following instructions in the owner's manual or by bringing it to a professional auto locksmith or a Fiat dealer.

Another common reason a fob may stop working is that it's not in reach of your vehicle. Key fobs generally have a range of 30 feet, and if they're too far from your car, they won't recognize them. The first step is to get closer to your vehicle. If that doesn't work, the key fob battery may need to be replaced. You can find replacement battery instructions for most vehicles on YouTube or in the owner's manual. This is a great time to think about getting a new key fob if the one you have is starting to look scruffy and damaged.

Faulty Receiver Module

Modern fiat 500 key fob not working models do not require the use of a key to start or open the car. These cars have keys that transmit wireless signals to the car to turn off and turn on the engine. A locksmith can repair a broken keyfob. You can save yourself time and money by delegating this job to professionals. They can also program the new key for your Fiat.

You'll have to give the locksmith a few details over the phone when you want a spare Fiat key. You will need to give the locksmith details about your car, like the year of its production and the model. This is crucial because the locksmith needs it to ensure that the new key works with the existing locks.

There are not many locksmiths who can make replacement keys for Fiat automobiles. You must choose one with a great reputation and experience in this particular field. This will allow you to be sure that the new key will work with your vehicle and you won't be wasting money.

Keys that are unpaired

The most common reason for a key fob to stop working is a dead coin cell battery. The key fob has metal retaining clips that hold the button cell in place and complete the circuit, in the event that they wear out or loosened, it can lead to contact problems and the loss of power. Replace the battery with one of the same size, voltage and specifications, or a spare.

It is essential to dry out the key fob if it was submerged into liquid. Using isopropyl or electronic cleaner is an effective way to do this. It is also recommended to remove the battery and clean the circuit board prior to replacing it.

If you're unable to find a spare key your best bet is to contact a locksmith. A professional locksmith can reprogram the Fiat transponder keys without having to look up your original keys. This is a speedier and less expensive option than waiting for an original fiat key programmer key fiat from Italy to arrive. A professional locksmith will also have the tools and equipment necessary to complete a replacement as fast as possible.