How to Get a New Key for Subaru

If your Subaru has a key fob, it can lock and unlock it at the press of the button. If the key fob has been dropped in the ocean, or washed in the washer and it is not working, it could be damaged.

Fortunately we at our Stocker Subaru dealership has a few tips to help you. You'll have to remove the key fob case in order to find the transmitter circuitry.

How can I get a brand new key

The process of getting a new key to the Subaru is easier than you think. It is possible to purchase an additional key at the dealer, an auto locksmith, or even online. Costs vary depending on the location you purchase the key and if it has to be programmed. It also depends on what kind of key you own (transponder smart fob, smart fob push to start, regular non-transponder).

It's best to contact an auto locksmith that specializes in Subaru vehicles if you require a new car key. They will know about the unique key fobs, as well as the key programming that is provided with them. If you're unsure of the type of key you own, check the sticker on your windshield to find out.

Certain keys come with Remote Start features that let you start your car from the comforts of your home. You'll also require the VIN number of the car which is located on the label in the door on the driver's side, or in the owner manual.

Subaru models made after 2000 have transponder keys that disable the computer in the engine. These keys cannot be duplicated using the same machines that are used to cut keys made of metal. You'll need to visit a dealer or locksmith to get replacements. A new key costs between $50 and $250 depending on the model.

How do I Get a Replacement Key

You can purchase an alternative subaru remote key replacement key in a few different ways, based on the type of car you have (chip, intelligent remote or "push-to-start" remote or a standard metallic key). You can order an online replacement key, contact the dealership where to get a subaru key made you purchased your vehicle, or an automotive locksmith who has the right equipment to make this type of key. You can obtain the replacement key from your dealership. It will be guaranteed to fit the vehicle you purchased it and will be covered under warranty, and will be programmed for your specific model.

To use a chip key it is necessary for the dealer to have the codes for your specific vehicle, which can only be done at the dealership from which you bought the car. This can be a bit of an inconvenience because you'll need to either bring your car to the dealer or let an automotive locksmith arrive and code the key on site.

Most hardware stores and locksmiths offer a wide selection of keys that are blank. To remove the battery, use a flathead screwdriver, or a metal key. Replace the old battery by an CR2032 coin cell, and secure the encasement.

How to get a key Fob

A key fob is a small remote device that lets you to control the electrical systems. It can open and shut off your vehicle also, lock it up, activate the alarm, and many more. If your Subaru key fob isn't functioning properly, you may need to replace it. Make sure you choose the correct fob for your vehicle. According to Consumer Reports, off-brand fobs could cause problems for the car's immobilizer.

If you own a more recent Subaru is likely that it uses the smart key system. These require special programming to function with your vehicle. The dealer should be able to complete this task and your warranty or roadside service program may cover the cost.

Older Subaru models use keys made of standard metal, which can be duplicated at a hardware store or locksmith. You can also purchase blank keys from online retailers who provide subaru keys made key chains with subaru forester replacement key fob logos.

You can fix the issue with your battery on your older Subaru New Key Fob Cost at home without having to visit a mechanic or pay for a key duplication service. You can find a small gap between the front and the back of the key fob. Utilize a flathead to rip apart the two halves. You'll see a flat battery inside. Replace the old battery with a 2025 type, making sure the correct side faces up. Then, insert the key from the metal into the battery and pop everything together.

How do you replace a key fob

In the past it was common for people to buy an inexpensive key fob from a hardware store or online and then take it to a locksmith or dealership to have it cut and programmed. It's still possible to do this, however it's preferential to deal with the dealer. This will stop the key from being copied, and also ensure that the new key fob has been programmed properly for your vehicle. This is particularly important if your vehicle has a more recent model that requires specialized programming, like those that have features like automatic parking and window rolling.

While these fobs enhance the convenience of driving your Subaru in Gilroy however, they can cause problems when the buttons stop functioning. Fortunately the replacement of the battery of your key fob is easy and you can do it yourself if know how.

Begin by locating the small space that divides the front and back of your fob. Utilize the tip of a key made of metal or a screwdriver with a flat head to remove the fob and look for the flat-round battery inside. Pull out the old battery and then insert a brand new 2032 battery into its place, making sure it's facing the same way that the original one. Then, put your device back together.

In the near future the keys to your car will be replaced with "smart" keys that have more capabilities. You will still be able to enjoy the features of your Subaru key fob until then. It will automatically open your window when your engine is running.