Protect Your Pride And Joy With The Ghost Immobiliser
Protect your pride & joy from theft by using the Ghost Immobiliser. It's discreet and does not require additional key fobs.
The device makes use of the buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence of up to 20 presses. This will then authorize the start-up of your vehicle.
Simple PIN Code Change Process
With the increasing rate of vehicle theft, a lot of owners are looking to improve their security. There are many different types of security products that are available for sale, from tracking systems to alarms and immobilisers. They're not all equally effective in protecting your car. A tracking device can aid in finding your vehicle in the event of it being stolen, but it will not stop the crime. An immobiliser, on the contrary, does exactly what it says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves to steal your vehicle.
By using the buttons that are already present in your car, the ghost device creates a unique sequence which must be entered before the car's engine will start. This can be done via the indicator stalk, window or heater buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This option is particularly useful when you need to give your car away for valet parking or maintenance, as the immobiliser will still be activated, but not disabled.
The Ghost is an innovative and unique device that works by using the buttons on your vehicle rather than as a separate unit. This means it's not only a highly effective protection against theft of your vehicle, but also a transferable device onto any other vehicles you may own, making it more valuable than a traditional steering wheel lock.
Small device that is weatherproof
The Autowatch Ghost Immobiliser Problems - Https://Mozillabd.Science/ - immobiliser is an advanced security system that protects your pride and joy against key cloning, hacking & ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be fitted into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices, which are a common technique that car immobiliser ghost thieves use to get around immobilisers.
The advantage of CAN data over conventional systems is that they work silently. It's not detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, the centre console, or doors, to create a unique disarming sequence. This sequence can be extended by 20 presses for additional security. The iPhone app lets you make only one, authenticated connection, with a pairing code that is unique to the Ghost and communication between the two is secured.
The Ghost also prevents thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start if the correct PIN code is entered. It is also possible to put it into valet/service mode for a temporary operation (with specified parameters, such as a 30mph speed limit) so that you can hand your car over to a valet service or to be serviced without needing to enter a pin code.
Tested for each vehicle
The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device intercepts electronic signals to disable the system of your vehicle from performing its normal startup routine until you input an individual passcode. The system can be turned on or off through your smartphone's app without the need for extra wires.
The factory-installed immobilisers function with a transponder which is integrated into the key. This sends a message to the ECU. The car will begin to start if the correct code is sent. However, if the transponder from a different vehicle is used instead, the immobiliser doesn't recognize it. This makes it possible for the vehicle to be stolen and started. The ghost immobiliser 2 immobiliser was created by an South African company at the forefront of vehicle security systems technology. It protects your vehicle from hacking, key cloning and even key theft. Only by physically towing your car away could a thief get it and not be able drive it.
Ghost makes use of the buttons on your vehicle, including the indicator stalk, steering wheel and door panels to create a unique PIN sequence that can be changed that needs to be entered before you can use your car. This is performed without the need for additional hardware like a key-fob and can be up to 20 presses long. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals, so thieves are unable to make use of sophisticated RF scanning or code grabbing techniques to determine if security systems have been installed.
Unlike physical anti-theft devices like wheel locks or clamps, Ghost is covertly integrated into the vehicle, so it cannot be removed or disabled by thieves. It's also harder to remove than a car alarm that requires disarming using a button sequence. This makes it a fantastic alternative to a GPS tracking device which can be used to locate your vehicle after it's been taken.
Override of emergency PIN code
You do not have to look far on social media for stories or videos about cars that were stolen using the most advanced technology tools. This includes key-cloning devices and hacking devices that allow them to start your vehicle without the original key fobs.
The ghost 2 immobiliser reviews immobiliser has been designed to combat this and provide you with an additional layer of security in order to keep your vehicle from being targeted by thieves. It is created by creating an individual pin code push sequence from your existing buttons on the steering wheel, door panel and the center console. The unique pin code is entered alongside your original key fob in order to prevent the engine from starting. The unique override pin can be found on a black card that you receive following the installation. It is simple to remember because there aren't any LED indicators.
The device is hidden in the vehicle's wiring and doesn't emit radio signals. This means it can't be detected by diagnostic software that can determine the type of security system you have installed. This makes it a great alternative to the tracker.
In contrast to other security systems that use an engine relay bay, these CANBUS Immobilisers connect with the car's ECU and BCM via CAN data bus (brand dependent). This allows them to shut down a vehicle completely by sending a digital block to the ECU and engine.
These systems can also be connected to an analog alarm immobiliser or tracker. This should be specified prior to installation. They are also service/valet-mode compatible and are a great alternative to a tracker you are taking your car in for repair at the dealership.
Service/Valet mode
In recent years, there has been a increase in the number of vehicles being stolen with no owner's keys. With easy access to key cloning tools and door lock pick sets it is now easier than ever for thieves to steal your joy and pride. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if you keys have been cloned.
It connects directly to your car's ECU (Engine Control Unit), via the data loop of CAN. It's completely silent since it doesn't utilize radio frequencies or keys fobs. It can't be detected by diagnostics or any other hacking device. It also protects against adding a new key or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.
The device is hidden inside your car and is reached via the buttons on your steering wheel, centre console and door panels. Before you can begin your car, you must enter a unique and changeable PIN number that is up to 20 numbers.
This is the very first aftermarket CAN-bus immobiliser for the market that is being designed. It can prevent your vehicle from being started or driven if you don't enter a PIN number first. If you are driving away with the device arming it will display an indicator on your dashboard which will flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your vehicle will continue to operate just as normal. If you do not enter your PIN in this moment the indicator will continue to flash and will require a new PIN every time you attempt to start your car.
