Autowatch Ghost Installers Midlands

More people are looking for aftermarket security products to safeguard their pride and joy. The Autowatch Ghost is one such solution.

This immobiliser on the CAN bus protects your car against hacking or key cloning and even ECU swapping. It utilizes your vehicle's original buttons to generate a unique PIN code sequence that must be entered before the car can start.

Easy to install

The autowatch ghost installer Ghost, a discrete next-generation immobiliser, connects to the CAN data network of your vehicle and does not require any additional wiring. It has an exclusive PIN sequence that is designed by our team, and is then entered using buttons on your dashboard. The device is small enough to fit within your vehicle's harness which makes it difficult for thieves to locate. It is also weatherproof and could be hidden in the most unlikely locations of your vehicle.

Once installed after installation, the Ghost immobiliser can't be identified by modern thieves who employ diagnostics to detect circuit breaks. The device does not transmit radio frequencies that could be detected by RF scanning and code-grabbing technology. So even if the vehicle is copied, or stolen, it will still hinder the engine from starting.

It can be fitted to the majority of new vehicles. It is also a great upgrade for classics, sports and prestige models that require storing their batteries in a safe environment. The system comes with a service mode that allows you to temporarily remove your PIN code so that garages are capable of working on your vehicle without knowing the code. The Autowatch Ghost 2 also comes with a tamper proof alarm and QR Fingerprint stickers that are registered to your car so if the car is broken down to parts, it will be traced back to you.

Autowatch ford fiesta ghost installer, from the Ebooksworld blog, 2 is an TASSA Verified product that is recognized by insurers. This can help reduce the cost of insurance. TASSA is a symbol of confidence in the security industry, indicating that a product has been independently tested and certified to work according to its specifications. This is the reason that many insurance companies will reward customers with an TASSA verified security system on their vehicle.

Autowatch is a renowned brand in vehicle security. They've been in operation for more than 20 years. With their experience and knowledge Autowatch offer a wide selection of products that can be installed by their authorized network of installers. You can trust that a licensed installer will install the products safely and correctly, in accordance with the manufacturers guidelines and instructions.

No extra wiring

The Ghost is a discrete, next-generation immobiliser that protects your vehicle against key theft and cloning. It connects to the CAN Data of your vehicle, and requires a individual-defined PIN number to turn off the engine. This is entered via the buttons on your steering wheel and dashboard in a specific sequence. The device is weatherproof and completely invisible.

Every day, more cars are taken without owners' keys. Cloning equipment & door lock picks are readily available to thieves, allowing them to take vehicles away in a matter of seconds. Be sure that you don't become a victim of car theft by protecting your vehicle by using a ghost alarm installation near me immobiliser from Autowatch Birmingham.

Like other immobilisers, the Ghost isn't connected to your key fobs and therefore cannot be disabled by cutting any wire. It is a small weatherproof device that is able to be concealed within your vehicle's wiring loom. This makes it virtually invisible to thieves.

The Ghost is an TASSA Verified System, which means it can be recognized by insurance companies and can potentially help reduce your premium. It is also linked with the international security register and is identified by the QR finger print stickers that are affixed to your vehicle.

Simple PIN code Change Process

It's simple and fast to change the PIN code of your Ghost. By using the Autowatch Ghost app on your iPhone, you can change the PIN code at any time. Follow the steps to create your new PIN code. Make sure your phone is Bluetooth-connected to the vehicle. Then, you can enter your button disarm sequence and then start the car. Be aware that if you change your PIN code then you'll need to pair the bmw x5 ghost installer again with the app.

The Autowatch Ghost is a discreet device that connects directly to your vehicle's CAN data network. It comes with a unique code that we configure together with you during the installation and fitting. It is completely waterproof and operates through the buttons on the dashboard or steering wheel. It doesn't utilize the use of radio frequency signals or LED indicators, making it inaccessible to thieves who use sophisticated codes and RF scanners to detect security systems that are not from the aftermarket.

Insurance companies are now accepting it as TASSA-approved and reduce your premiums. It protects against key-cloning and hacking, as well as ECU swapping to shut down your vehicle's engine. This means that even if the vehicle is stolen and stripped for parts, the components can be tracked back to the original vehicle owner by using QR codes that are concealed on the inside of bodywork and trim panels, as well as other areas of the car.

The GHOST-II also comes with a specific QR sticker for finger prints that is linked to the secure international register. The GHOST II is also fitted with a unique QR finger print sticker that is connected to the international secure register.

It also protects against a new form of theft called relay attack. The thieves steal the vehicle they want, and then use an instrument that impersonates the security system in the car to control the vehicle remotely. The GHOST II guards against this by preventing data transmission between the inbuilt security system and the remote controller.

Small, weatherproof device

A small, weatherproof device is hidden in the wiring loom in your vehicle, and once concealed it's difficult for thieves to spot. Our skilled installers are able to install it. It's designed to be as compact and efficient as is possible without having to sacrifice size. The Autowatch Ghost II Immobiliser communicates with your vehicle's ECU via the onboard CAN network. This means it's completely silent & cannot be detected by thieves listening for the tell-tale clicking of a traditional relay type immobiliser. It also blocks key cloning and ECU swapping, which are commonly used to steal vehicles.

The Autowatch Ghost immobiliser offers high security, protection from key cloning and key theft. It is TASSA certified, which means it's acknowledged by insurance companies. This could lower your premium. It works by blocking engine start with a user-defined PIN code that is entered using buttons on the dashboard or the steering wheel. The pin can be made up to 20 presses for extra security and if you forget the code or a button breaks the emergency pin can be entered to disable the system and allow the vehicle to start.

Modern cars are equipped with keyless entry and contactless smart keys that make it easier for thieves to steal your car keys and gain access to your car. The Autowatch Ghost immobiliser is the ideal solution to this problem. It's designed to be as small and discreet as is possible, and makes use of the vehicle's existing buttons. It is easy to install and doesn't require wiring as it communicates with the onboard ECU directly over the CAN data networks.

It is an CAN built system, so there is no need for complicated circuitry. The immobiliser is able to be modified to fit the majority of cars on the market without the need for additional components. The CAN data networks has an added benefit of not being susceptible to radio frequency scanning and codes-grabbing techniques.