Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft with the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs to operate.

The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be modified up to 20 times. This will then allow the vehicle to start.

Simple process to change the PIN code

With the rising rate of vehicle thefts, many owners are looking to improve their security. There are many types of security products that are available from tracking systems to immobilisers and alarms. Not all of them are equally effective at protecting your vehicle. While a tracking system may assist in finding your vehicle in the case of theft, it does not prevent the crime from happening in the first in the first place. An immobiliser, on other hand is exactly what says on the tin: it shuts down the engine of your vehicle so that it cannot be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

Utilizing the buttons already in your car, the ghost device creates an unique sequence that must be entered before the car's engine can start. This can be accomplished using the indicator stalk, window or heater buttons. In addition to this option, there is a mobile app which acts as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This option is particularly useful if you need to surrender your car for valet parking or maintenance because the immobiliser will still be activated and not disabled.

The Ghost is a very unique and ingenious device that is used in conjunction with the buttons in your vehicle rather than being a standalone device. It's not just an effective deterrent to theft of your vehicle and vandalism, but it can be used to secure any future vehicles you own. This makes it a much more cost of ghost immobiliser-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser problems immobiliser is a sophisticated security system that guards your pride and joy against key cloning, hacking and ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly via the CAN bus to disable the motor. It can be placed in the vehicle without the need for extra wiring and has been thoroughly tested to make sure it works with all vehicles. It also is resistant to jamming devices that are a popular technique used by thieves to get around immobilisers.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques, nor can it be identified by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console or doors, to create unique sequences for disarming. You can even create a sequence that is as long as 20 presses for added security. The iPhone app is limited to one connection, with the Ghost's unique pairing code. the ghost 2 immobiliser cost. All communication between the two devices is encrypted.

The Ghost also stops thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to start when the correct PIN code is entered. It can also be put into valet/service mode for a temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service for maintenance without having to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device snoops on electronic signals that block your car's system from running its normal initialization process until you enter an individual passcode. The system can be turned on or off through your smartphone's app without the need for extra wires.

Standard factory immobilisers for vehicles function by using a transponder built into the key that sends a signal to the ECU. The car will start if the correct code is transmitted. However, if a transponder of a different vehicle is used instead, the immobiliser won't recognize it. This makes it possible for the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology has developed the Ghost immobiliser. It shields your car from key cloning, hacking and even key theft. Only by physically towing your car away from thieves could they get it, and they would still not be able to drive the vehicle.

Ghost utilizes the buttons of your car, such as the indicator stalk, steering wheel and door panels to create an unique PIN sequence that can be changed that must be entered before you are able to use your car. This is performed without the need for additional hardware, such as a key-fob and can last up to 20 presses long. It is also unrecognizable to diagnostics equipment and doesn't transmit radio frequency signals so thieves are unable to use sophisticated RF scanning or code grabbing technology to discover that a security system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is concealed within the vehicle so it can't be disabled or removed by thieves. It's also harder to remove from a car alarm which requires disarming using the use of a button sequence. This makes it a great alternative to a GPS tracker which helps locate your car after it's been stolen.

Override of emergency PIN code

You do not have to look far on social media to see stories or even videos of vehicles that have been stolen by car thieves employing the most advanced technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle without your original keys.

The Ghost immobiliser was specifically designed to prevent this and provide you with an extra layer of security in order to protect your vehicle from being targeted by thieves. It works by creating an individual pin code push sequence from the buttons you have on the steering wheel, door panel and centre console. The unique pin code is entered along with your original key fob in order to stop the engine from starting. The unique override pin is found on a black card that you will receive after your installation. It is simple to remember because there aren't any LED indicators.

The device is hidden inside the vehicle's wiring and doesn't emit any radio signals, so it isn't able to be detected by modern thieves with diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to a tracker.

In contrast to other security systems which use a relay in engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely with an electronic block of commands for both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems but this must be specified before installing the device. They are also service/valet mode-compatible and a great alternative to a tracker when you are taking your car in for repairs to an electrical issue at the dealers.

Service/Valet mode

In recent years, there has been a rise in the number of vehicles being stolen with the owners' keys. With easy access to key cloning tools and door lock pick sets, it is now easier than ever for thieves to take your prized possessions. We have created the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if you keys have been cloned.

It directly communicates with your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it doesn't use radio frequency or a key fob. It can't be detected by diagnostics or any other hacking device. It also protects you from introducing the new ECU or key to circumvent the system, as only the PIN code allows the engine to be started.

The device is hidden inside your car and can be accessed by existing buttons on your steering wheel, centre console and door panels. Before you can start your car, you need to enter a unique and changeable PIN code that can be as long as 20 digits.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car from being moved away or even started if a PIN code isn't entered prior to. If the device is armed and you attempt to drive off it will display an indicator on your dash, which will flash on a regular basis for approximately 300m, if you enter your PIN code at this point it will deactivate the anti-hijack system and your vehicle will continue to operate as normal. If you do not enter your PIN code at this point, the warning will continue to flash and will require another PIN code for every attempt to start your car.